DIY Bunny Drawstring Pouch

My 18mo tiny human has recently developed an interest to carry bags, and of course, to take everything out from the bag too. She would get herself so busy by dragging bags as big as her, or even doubles her size here and there. Yes, you are right! The consequence of this: she often trips herself over the bags. And kids being kids, she would scream her lungs out if I were to take it away. Since I've plenty of scrap fabrics from my previous projects, I decided to make her a small drawstring pouch so that she can play around with it. This seems like a long post but it's really not that difficult to make. Hehe.

Materials:

White outer fabric (I used cotton-linen)
Inner fabric (I used Japanese cotton)
Pink fabric
Fusible web (optional)
Pink embroidery thread
Washable fabric marker/ chalk
String/ ribbon

Method:

1. Cut fabric based on the measurement below. I draw and cut my ear template on a piece of manila card before tracing on the fabric and cutting it. Cut fusible web to the exact size of the pink ear fabric.

2. Sandwich fusible web between the white and pink fabric. Place iron on top and apply heat until the fabrics bind together. Sew around the pink fabric using zig-zag or blanket stitch. It's fine too if you don't have fusible web, just pin fabrics together or baste by hand stitching.

3. Place the ear fabric right sides together and sew, leaving the bottom of the ear open. Clip curves to remove fabric bulk. Flip the ears inside out and the bunny ears are all done.

4. Draw two small triangles on the bottom of all the outer and inner fabrics.

5. Fold the triangle in and sew it down on the wrong side of the fabric.

6. You'll end up with something like this on the right side of the fabric. Mark 3 dots at the centre of the front piece as a guide to sew the bunny's nose.

7. Hand sew the bunny's nose with a simple whip stitch.

8. Draw the mouth and sew on the marking by using back stitching. Do the same to get the eyes.

9. Sew the outer fabric right sides together. Repeat for inner fabric, but leave a small opening to turn the pouch inside out later (if you look close enough, there's no opening in this picture because I forgot to, so I ended up ripping seams to get a small opening >.<). Overcast raw edges. Put the outer pouch into the inner pouch and match the seams on the sides.

10. Prepare casing (from the 5 x 12 cm rectangles) as shown in picture. 

10. Yay, it's finally time to put all pieces together. Sandwich prepared casing fabric between outer fabric and inner fabric (the casing fabric should be slightly shorter, so just place it in the middle). Repeat for the back of the pouch with another folded rectangle. Now sandwich the bunny ears between the outer fabric and casing fabric (make sure the bunny ears are put in the right direction so that it is facing forward). 

11. Pin everything together and sew along edges followed by overcasting stitch to finish-off edges.

12. Flip the bag inside out through the small opening at the side.

13. Close the opening using ladder stitch. Push the lining fabric back into the pouch.

14. Attach safety pin to one of the end of the string. Thread it through the casing on one side then back around the other side. Tie the ends in a knot. Repeat with another string on the opposite side of the pouch.

 

15. Using a ladder stitch (i.e. an invisible stitch), sew the bunny ear to the casing to give the ears some support. Be careful not to stitch through the ear. You will want to just stitch the surface layer of the ear to the casing.

Ta-daah! this is the final look of the bunny drawstring pouch.

This pouch is really small so that it's easier to be carried by my tiny human. It'll fit a few packs of tissue paper and a mini box of raisin (to distract Baby V when she is throwing tantrums). Do adjust the size of the pouch accordingly if you are making it for older kids, or even yourself. If you are confused with any of the above steps, please drop me a message so that I can help you figure out. Happy sewing! :D

SaveSaveSaveSaveSaveSaveSaveSaveSaveSave

Mom and Baby Matching Outfits

I don't have a tutorial to share today so this is basically just a show-off of what I've made recently. Haha. This is the fourth baby dress I've made for my lil' missy. It's not that difficult to put together but it's definitely the most complicated one I've ever made (as compared to easy pillowcase dresses without buttons or zipper :P). And yes, I made that drawstring bunny pouch for her too! Please tell me it does look like a bunny because the first time I gave it to her, all she said was "Cat cat, cat cat!" I don't know whether I should cry or laugh at her statement. >.<

Cheeky Baby V

Baby V: "Nope, I'm not pooping!" LOL

I've always wanted to make myself a dress but is intimidated by the complexity of dress patterns, bodice pieces, neckline cutting, waist cutting, applying zippers, and most importantly, how on earth do I make sure that the dress fits me upon completion? I am after all, just a sewing hobbyist. 3.E With all these thoughts, I figure it's best to make a dress with an elastic waist. This is probably the easiest way to eliminate complicated cuttings and at the same time reduce the chances of getting something that doesn't fit in the end. And why off-shoulder? Because it's the in-thing now, I think. :P And of course, it's a lot easier to make than having to sew neat neckline and armholes. Haha.

So here goes~ How does it look? Pretty decent, right? LOL, shiok sendiri mode ON. Haha.

Nope, my lil' missy cannot sit still for more than 2 seconds.

And, this was her falling backwards. Almost. Haha.

Looks easy enough to make, huh? As much as I don't want to admit, I've made so many alterations along the way to make it fit better and I've lost count of how many times I needed to use the seam ripper. If you sew quite a bit too, I bet you'll agree that ripping off seams is the most annoying thing to do and it often comes in a package together with cursing and swearing. LOL. I whined so much that M finally gave this "brilliant" suggestion: Why don't' you just use this as a rug (his exact words were 拿来做擦脚布啦) and make another one? I was like what? You really want to mess with me? My blood was already boiling with all the seam ripping and you have to be so mean now? Geez. Sometimes I really wonder where all his courage and "brilliant" ideas came from. :P 

Well, me being me, there's no way I'm going to let my pretty fabric go to waste so I persevered anyway, until I'm pretty satisfied with the outcome. :P I'll come up with a step-by-step together with the RIGHT measurements soon but you'll need to use it at your discretion because I sew for fun and professional dressmakers would probably sew it in an entirely different manner. Stay tuned for the baby dress and drawstring bunny pouch step-by-steps too!

P/S: Photo credited to M. Yeah, he is mean sometimes but it's great to have a patient hubby who loves to take photos (so that I can take like a gazillion shots until I get the feel I wanted. Muahahaha.)

Gula Melaka Huat Kuih

Hi guys! I've got an easy Huat Kuih recipe to share today. Why Gula Melaka? Because it gives a nice aroma and a nice brown colour to the Huat Kuih. And of course, it's partly because I have leftover palm sugar syrup from making grass jelly drink. Hehe. There are various versions of Huat Kuih using different leavening agents but I'm using instant yeast and baking powder for this recipe.

Before I start going into details, this is how I prepare the palm sugar syrup:

1. Melt palm sugar in boiling water at 1:1 ratio

2. Stir constantly to prevent burning

3. Stop boiling once sugar is melted

4. Let cool

Pretty easy, right? Now that it's done, you are all set to make the Huat Kuih!

Ingredients (A):

5 tablespoon palm sugar syrup

3 tablespoon flour

1 sachet instant yeast (11g)

Ingredient (B):

300 g flour

100 ml coconut milk 

100 ml palm sugar syrup

1 egg

1 teaspoon baking powder

Method:

1. Mix ingredients (A) together and let it proof for 10 mins. 
2. Mix ingredients (B) together.
3. Mix both batter from (A) and (B) until well combined. The batter should be gooey instead of runny.
4. Scoop batter into moulds until 3/4 full.
5. Using a scissor, cut a "+" on top of the batter (poke scissor deep till the middle of the batter). This step assists the Huat Kuih to "bloom" better during steaming.
6. Bring water to boil in the steamer. Put the batter-filled moulds into the steamer and steam over high heat for 20 minutes.

Ta-daah,  the cakes are now ready to be served! 

Aren't these Huat Kuih lovely?

This recipe yields 9 small cakes. If you have leftovers, just let cool and store in the fridge in an air tight container. Steam it the next time you want to have it and it will be all nice and fluffy again! Oh, before I forget, these cake taste mildly sweet, if you like them sweeter, just boil your palm sugar syrup a little longer to get a thicker and sweeter syrup. Enjoy!

SaveSave

DIY White Radish/ Carrot Plush

I'm back with another fun project here! If you have been following my Instagram or Facebook, you'll know that this project was initially meant to be a pincushion. However, my lil Baby V decided that the carrot belongs to her the moment she saw it. Hmmm, love at first sight, huh? LOL. Since I've got plenty of leftover white fleece from my quilting projects, I decided to make a white radish and share how it's done, in case you want to make one for your tiny human (or for yourself maybe? Haha) :P I promise it's super easy and you'll probably get it all done in less than 30 minutes.

Materials:

White fleece (Orange fleece if you prefer to make a carrot)

Green fleece 

Light brown thread (White threads if you are making a carrot)

2 black shank buttons

Black felt

Red felt

Poly fillings (I use scrap fleece fabrics but poly fillings will definitely be more snuggly)

Method:

1. Cut a triangle and a rectangle. The rough measurement of my rectangle and triangle is as shown in photo but you can alter it to your preference (I think it's super fun to have a carrot bolster thou :P)

2. Using light brown threads, randomly sew straight lines on the triangle.

3. Set the machine on the longest stitch and stitch a line along one side of the rectangle (the longer side). Pull either the top thread or the bottom thread and slide fabric together to create ruffles. Adjust the ruffles so that the resulting length of the fabric matches the length of the triangle. You will end up with something like this.

4. Pin green fabric and white fabric right sides together and stitch them together.

5. Put right sides together and sew a line down from top to bottom to create a casing. Remember to backstitch at the start and at the end of the line.

6. Flip it inside out and carefully push the bottom out by using a pen or a chopstick. Add poly fillings into the casing from the opening at the top of the white radish.

7. Close the opening by hand stitching. Gather and tighten fabric as you sew. Knot the thread when you reach the end of the seam.

8. Cut one piece of half circle from black felt. Cut another smaller piece of half circle form red felt.

9. Attach tongue to mouth by using a glue gun.

10. Trim away edges and the mouth is ready to be attached to the white radish.

11. Sew two black thank buttons onto the white radish as eyes.

11. Randomly cut the green fabric in straight lines. The advantage of using fleece fabric is that it doesn't fray so you can cut the green fabric into as much leaves as you want. :D

12. Ta-daah, it's all done! Time to enjoy some acupuncture! LOL.

SaveSaveSaveSave

DIY Owl Pillow

Today I'm going to share the step-by-steps of an owl pillow I made quite some time ago. It's really quite easy to make so perhaps you can consider it as your weekend sewing project. Hehe. I used fleece because the fabric is not just snuggly but stretchy as well, and therefore creates a puffier owl pillow.

Materials:

Orange fleece (the amount of fabric needed is dependent on the size of pillow you want to make)

Some cotton fabric in matching colour

White fleece

Black fleece (I used black colour felt because I don't have black fleece :P)

Poly filling

Threads in matching colour

Method:

1. Fold manila card (I ran out of this so I just used a large paper bag) into half and draw the shape of your owl. Cut the paper template. Cut two pieces of owl shaped fleece base on the template.

2. Draw (I traced the edges of a bowl) and cut eye template . Cut the eyes of the owl from white fleece.

3. Cut the blacks of the eyes.

4. Cut tummy piece base on your template. 

5. Baste the eyes, tummy and beak (just cut a small triangle) onto the body by hand-stitching. 

6. Using zigzag stitch on your sewing machine, appliqué all pieces to the body. Once you are done, just cut the baste stitches. Repeat for the black of the eyes.

7. Sew the body of the owl right sides together, leaving a small opening to put in the stuffing later. Clip the corners and curves to remove bulk from the inside of seams.

8. Flip the owl inside out and the casing is ready for stuffing.

8. Stuff poly fillings into the owl and close the opening by using ladder stitch.

Ta-daah, it's all done! Have fun! :D

SaveSaveSaveSaveSaveSave